Ich hätte nicht gedacht, dass die 1102 Motoren eine DJI O3 Air Unit tragen können. Toll zum Rumfliegen, Video in 4K Filmen, ob in der Wohnung oder draussen.
Man sollte aber vorsichtig fliegen, schliesslich ist das ein 300 EURO CineWhoop der keinen Crash überlebt.
#Kopterheld #betafpv
–
Hier alle Infos zu dem HD Frame
https://betafpv.com/products/sub100g-whoop-drone-with-dji-o3-beta-test?sca_ref=47863.nSdqBoHFj7
STL Dateien zu finden bei BetaFPV FB Seite – https://www.facebook.com/betafpv/posts/3599771450285228
Geprc Cinelog20 HD O3 Air Unit Coupon: BGMatt2022 – https://www.banggood.com/custlink/vDKWUhnNy7
GEPRC Official Store – https://s.click.aliexpress.com/e/_De5YZh3
1102 14000KV Motor – https://betafpv.com/collections/brushless-motors/products/1102-13500kv-brushless-motors?sca_ref=47863.nSdqBoHFj7
F4 1S 12A AIO FC ELRS – https://betafpv.com/collections/brushless-flight-controller/products/f4-1s-12a-flight-controller?sca_ref=47863.nSdqBoHFj7
O3 Air Unit – https://bit.ly/iflo3
Hole Dir 10% Coupon: für BetaFPV Shop – http://bit.ly/betafpv10
Und nutze die GIFTCARD um 5% bei BetaFPV Shop zu sparen Coupon: GIFTCARD – http://bit.ly/BetaFPVgc
Spare mit dem Code 3C2J2 bei Drohnenversicherung: https://bit.ly/kheldver
Kopterheld Coupons:
https://t.me/s/KopterHeld
https://kopterheld.tv/
https://www.facebook.com/kopterheld/
# meine Einstellungen 20230504
# BlueJay 48k 0.92
# Presets: 150Hz ELRS serial, Cinematik,
# UAV Tech 2-4 toothpick quad, RPM Filter an
# Betaflight / STM32F411 (S411) 4.4.1 Apr 10 2023 / 22:28:00 (e43d591b2) MSP API: 1.45
# config: YES
# start the command batch
batch start
# reset configuration to default settings
defaults nosave
board_name BETAFPVF4SX1280
manufacturer_id BEFH
mcu_id 005200523535510936323431
signature
# name: SUB100 O3
# feature
feature -RX_SERIAL
feature -SOFTSERIAL
feature -AIRMODE
# serial
serial 0 131073 115200 57600 0 115200
# beacon
beacon RX_LOST
beacon RX_SET
# led
led 0 0,0::A:0
led 1 1,0::A:0
# aux
aux 0 0 0 1700 2100 0 0
aux 1 1 1 900 1300 0 0
aux 2 2 1 1300 1700 0 0
aux 3 13 2 1700 2100 0 0
aux 4 28 1 1300 2100 0 0
aux 5 35 3 1700 2100 0 0
# master
set dyn_notch_count = 0
set dyn_notch_min_hz = 125
set dyn_notch_max_hz = 850
set acc_lpf_hz = 10
set acc_calibration = -8,49,7,1
set rc_smoothing_auto_factor = 175
set rc_smoothing_auto_factor_throttle = 100
set rc_smoothing_setpoint_cutoff = 12
set rc_smoothing_feedforward_cutoff = 12
set rc_smoothing_throttle_cutoff = 20
set dshot_bidir = ON
set dshot_bitbang = ON
set motor_pwm_protocol = DSHOT300
set motor_poles = 12
set motor_output_reordering = 2,3,0,1,4,5,6,7
set align_board_roll = 180
set vbat_max_cell_voltage = 435
set ibata_scale = 850
set yaw_motors_reversed = ON
set small_angle = 180
set osd_vbat_pos = 2529
set osd_rssi_pos = 228
set osd_link_quality_pos = 2338
set osd_rssi_dbm_pos = 2370
set osd_tim_2_pos = 3436
set osd_flymode_pos = 3566
set osd_throttle_pos = 2465
set osd_crosshairs_pos = 2361
set osd_current_pos = 374
set osd_craft_name_pos = 2549
set osd_warnings_pos = 14771
set osd_core_temp_pos = 182
set osd_displayport_device = MSP
set vcd_video_system = HD
set expresslrs_uid = 81,250,30,99,224,96
set expresslrs_domain = CE2400
set expresslrs_rate_index = 2
set expresslrs_switch_mode = HYBRID
set rpm_filter_harmonics = 2
set craft_name = SUB100 O3
profile 0
# profile 0
set dterm_lpf1_dyn_min_hz = 90
set dterm_lpf1_dyn_max_hz = 180
set dterm_lpf1_static_hz = 90
set dterm_lpf2_static_hz = 180
set pidsum_limit = 1000
set pidsum_limit_yaw = 1000
set yaw_lowpass_hz = 0
set p_pitch = 70
set i_pitch = 126
set d_pitch = 45
set f_pitch = 187
set p_roll = 67
set i_roll = 120
set f_roll = 180
set p_yaw = 67
set i_yaw = 120
set f_yaw = 180
set d_min_roll = 40
set d_min_pitch = 45
set thrust_linear = 20
set feedforward_smooth_factor = 35
set feedforward_jitter_factor = 12
set simplified_master_multiplier = 150
set simplified_d_gain = 90
set simplified_dmax_gain = 0
set simplified_dterm_filter_multiplier = 120
profile 1
profile 2
profile 3
# restore original profile selection
profile 0
rateprofile 0
# rateprofile 0
set roll_rc_rate = 2
set pitch_rc_rate = 2
set yaw_rc_rate = 2
set roll_srate = 50
set pitch_srate = 50
set yaw_srate = 50
rateprofile 1
rateprofile 2
rateprofile 3
# restore original rateprofile selection
rateprofile 0
# save configuration
save
Kopterheld 